Formulary

December 2007 forumlary:

Peppermint Foot Scrub Clean and In Control Shampoo Botanical Foot Powder Hair Combing Cream

Moonshine Gloss & Repair Shampoo Sulfate Free Shampoo Gel Broad Spectrum SPF 30 PA Sunscreen

Peppermint Foot Scrub

Phase A

Deionized Water

78.50

Carbopol Ultrez 21 Polymer (Lubrizol Advanced Materials, Inc., Noveon Consumer Specialties)
(Acrylates/C10-30 Alkyl Acrylate Crosspolymer)

0.65

Sulfochem TLS Surfactant (Lubrizol Advanced Materials, Inc., Noveon Consumeer Specialties)
(TEA Lauryl Sulfate (41%))

4.00

Propylene glycol

2.50

Phase B

Glycerin

2.50

Peppermint Oil, triple distilled

0.10

Herbasol Chamomile (Matricaria) Extract PG Decolorized (Cosmetochem)
(Chamomilla Recutita (Matricaria) flower extract, propylene glycol)

0.05

Herbasol Ivy Extract PG (Cosmetochem)
(Hedera Helix (Ivy) Extract, Propylene Glycol)

0.05

Phenonip (Clariant)
(Phenoxyethanol, Methyl-, Ethyl-, Butyl-, Propyl-, (and) Isobutylparaben)

0.70

Phase C

Peerless Pumice 0-12 (Charles B. Crystals Co.)
(Pumice)

10.00

Red 33 (0.1%)

0.35

Triethanolamine (99%)

0.60

Comments::
1.   Disperse Carbopol Ultrez 21 Polymer by sprinkling on the surface of warm (~40°C) deionized water, without mixing. After polymer has wetted, mix slowly for 10 minutes.
2.   Add remaining Part A ingredients in order to the batch using slow agitation. Mix until uniform.
3.   In a separate vessel, pre-mix Part B ingredients and add to Part A. Mix slowly until homogenous.
4.   Add ingredients one at a time in Part C to Parts A/B in order, mixing thoroughly between. Mix until uniform.

More info: Lubrizol Advanced Materials, Noveon Consumer Specialties, 9911 Brecksville Road
Cleveland, OH 44141-3247. Tel: 216.447.5000, 800.379.5389; Fax: 216.447.5250; Website: www.personalcare.noveon.com

Clean and In Control Shampoo

Phase A

Deionized water

34.72

Carbopol 980 (Noveon)
(Carbomer)

0.20

PEG 7M

0.20

Ammonium lauryl sulfate

14.00

Ammonium laureth sulfate

40.00

Incronam 30 (Croda)
(Cocamidopropyl betaine)

6.60

Glycerin

1.00

Lustreplex (Croda)
(Polyquaternium-70 (and) dipropyleneglycol)

1.42

Crodasone Cystine (Croda) (Cystine bis-PG-propyl silanetriol)

1.00

Crosilk Liquid (Croda) (Silk amino acids)

0.20

Disodium EDTA

0.10

Crothix Liquid (Croda) (PEG-150 pentaerythrityl tetrastearate
(and) PEG-6 caprylic/capric glycerides
(and) water)

0.26

Flamenco Gold 220C (Engelhard/BASF)(Titanium dioxide (and) mica)

0.20

Neolone 950 (Rohm and Haas) (Methylisothiazolinone)

0.10

Procedure::

Charge beaker with deionized water and begin heating to 60°C. Sprinkle carbomer in the vortex and mix with strong agitation until it is completely dispersed. Repeat the procedure with PEG 7M. When polymers are completely dispersed, reduce the mixing speed and add the ingredients one at a time while continually mixing but avoiding air entrapment in the batch. When all the ingredients are completely mixed and the batch cools to room temperature, check the pH and viscosity.

More info:
Croda Inc., 300-A Columbus Circle, Edison, NJ, 08837
Tel: (732) 417-0800; Fax: (732) 417-0804; Website: www.crodausa.com

Botanical Foot Powder

Farmal CS 3757 (Corn Products(Zea mays (corn) starch)

86.25

Sodium bicarbonate

12.00

Cab-o-sil M5 (Corn Products) (Silica dioxide)

0.80

Lavender oil

0.60

Tea tree oil

0.20

Methylparaben

0.15

Procedure::
Mix all ingredients in a ribbon blender until uniform.

Appearance: White powder.

More info: Corn Products International, Inc., 5 Westbrook Corporate Center, Westchester, IL 60154
Tel: (800) 443-2746 Fax: (708) 557-0058 Website: www.farmalingredients.com

Hair Combing Cream

Phase A

Deionized water

84.00

Carbopol Aqua CC Polymer (Noveon)
(Polyacrylate-1 crosspolymer)

1.50

Propylene glycol

2.00

Ammonyx 4B (Stepan )(Stearalkonium choride)

3.45

Phase B

Lanette 16 (Cognis Corp.)(Cetyl alcohol)

2.20

Lanette 18 (Cognis Corp.) (Stearyl alcohol)

1.25

Myritol 318 (Cognis Corp.) (Caprylic/capric triglyceride)

4.55

Phase C

Glydant Plus Liquid (Lonza, Inc.)
(DMDM hydantoin, iodopropynyl butylcarbamate)

0.30

Herbess Melocoton MEX-EC0016949 (Mane)
(Fragrance)

0.60

Citric acid (50% acid solution)

0.15

Procedure::
Weigh deionized water into vessel and add Carbopol Aqua CC Polymer. Add remaining ingredients in phase A in the order shown, ensuring that each ingredient is completely dissolved prior to the addition of next ingredient. Heat to 70°C. Mix phase B ingredients in a separate vessel. Heat to 70°C. Add phase B to phase A and mix completely. Wtih mixing, begin cooling to 45°C. Add ingredients of phase C in order shown. Mix until homogenous while batch cools to 35°C. Adjust pH 4.5-5.0 with citric acid.

More info: Noveon, 9911 Brecksville Rd., Cleveland, OH 44141-3247
Tel: (800)379-5389; Fax: (216) 447-5250 Website: www.personalcare.noveon.com

Moonshine Gloss & Repair Shampoo

Water

73.63

Jaguar C 14 S (Rhodia )(Guar hydroxypropyltrimonium chloride)

0.20

Texapon N 70 (Cognis) (Sodium laureth sulfate)

14.30

Dehyton PK 45 (Cognis )(Cocamidopropyl betaine)

5.40

Lamesoft Care (Cognis)

4.00

Gluadin WLM (hydrolyzed wheat protein) (Cognis)

0.50

Perfume, preservative

q.s.

Dehydol LS 2 DEO N (Cognis)

1.00

Citric Acid

0.07

Sodium Chloride

0.90

Procedure::
Present water, add Jaguar C 14 S and let it swell under stirring for about 10 minutes. Then mix the following ingredients in given order, set pH and adjust viscosity with salt.

More info: Cognis Corp., Care Chemicals Division, 300 Brookside Ave, Ambler, PA 19002
Tel: (800) 531-0815; Fax: (215) 628-1450; Website: www.cognis.com

Sulfate Free Shampoo Gel

Phase A

Deionized water

64.93

Tetrasodium EDTA

0.30

Phase B

Tauranol SCMI-85 (Innospec)

12.27

Glycerine

2.00

Cocamidopropyl betaine

20.00

Preservative

0.50

50% Citric Acid Solution

adjust to pH 5.5-6.0

Procedure::
Dissolve EDTA in deionized water. With smooth mechanical agitation, slowly blend Tauranol SCMI-85 into system. Begin heating to 50-60°C and mix until completely dispersed. Blend in glycerine and cocamidopropyl betaine. Cool system to 30-35°C, add preservative and mix until uniform. Adjust pH to 5.5-6.0 with citric acid solution as needed.

More info: Innospec Performance Chemicals 379 Thornall St. Edison, NJ 08837
Tel: (732) 321-3500 Fax: (732) 321-3519 Website: www.innospecinc.com

Broad Spectrum SPF 30 PA Sunscreen

HallBrite OS USP (HallStar) (Ethylhexyl salicylate)

5.00

HallBrite HS USP (HallStar) (Homosalate)

7.50

Parsol 340 (DSM Nutritional)
(Octocrylene)

2.75

HallBrite BHB (HallStar) (Butyloctyl salicylate)

5.00

Polycrylene (HallStar)(Polyester-8)

3.00

Vitamin E Acetate Oil USP, FCC, (BASF) (Tocopheryl acetate)

0.20

Parsol 1789 (DSM Nutritional)(Butyl methoxydibenzoylmethane)

3.00

Neo Heliopan BB (Symrise) (Benzophenone-3)

4.00

CoVera (HallStar) (Aloe barbadensis leaf juice)

0.50

SD Alcohol 40

67.05

Dermacryl 79 (National Starch) (Acrylates/octylacrylamide copolymer)

2.00

Procedure::
An explosion-proof environment is required throughout preparation and packaging.
Add the first six ingredients to secondary vessel, start center-stir (prop) mizing, heat to 50°C and then add Parsol 1789 and Neo Heliopan BB. When homogenous and clear, start cooling. To the primary vessel add the alcohol and aloe vera. With mixing add Dermacryl 79. Slowly add secondary vessel contents to the main vessel contents. When uniform and clear, perform final quality assurance checks and package product in pump spray bottle.