Phase A | |
Water | q.s. to 100 |
Glycereth-26 | 2.50 |
Zemea (Dupont) (Propanediol) | 2.00 |
Natrosol Plus 330 CS (Ashland) (Cetyl hydroxyethylcellulose) | 0.50 |
Rapithix A100 (Ashland) (Sodium polyacrylate) | 0.25 |
Phase B | |
Syneth P11 (Lonza) (Polyglyceryl-10 dipalmitate) | 4.50 |
JeenChem CTG (Jeen) (Caprylic capric triglyceride) | 1.50 |
Dermol 99 (Alzo) (Isononyl isononanoate) | 2.50 |
Phase C | |
H2OBioEV (Lonza) (Aqua, glycerin, aphanothece sacrum polysaccharides, galactoarabinan) | 3.00 |
Geogard ECT (Lonza) (Benzyl alcohol, salicylic acid, glycerin, sorbic acid) | 1.00 |
Glycasil L (Lonza) (Iodopropynyl butylcarbamate) | 0.10 |
Sodium hydroxide 10% (Sodium hydroxide) | q.s. |
Procedure | |
In main beaker combine phase A ingredients, water, glycereth-26 and Zemea. Mix uniform and heat to 75°C. Add Natrosol Plus and mix until uniform, followed by Rapithix A100 and mix until uniform. In side beaker combine phase B ingredients and heat to 75°C and mix until uniform. Add phase B to phase A and mix until uniform, mix for 20 minutes. Remove the heat and cool to below 45°C and add preservative and H20BioEV, mix until uniform. If necessary, adjust the pH between 5.0 – 6.0. | |
Properties | |
pH—5.0 – 6.0; Viscosity—3,500 – 5,000 (Spindle 6, 10 Rpm); Appearance—white serum. | |
More Information | |
Lonza Tel: 800-777-1875 Email: [email protected] Website: www.lonza.com |